USB Type-C PD Decoy Trigger Board 9V 12V 15V Output PD 2.0 3.0 Trigger Adap A~gw

Description

100W 5A USB Type-C PD Decoy Trigger Board 5V 9V 12V 15V 20V Output PD 2.0 3.0 Trigger Adapter Cable Connection Polling Detector Description: - It is a PD2.0/3.0 decoy. - It is often used to use power banks with PD protocol such as power banks or chargers to trick the corresponding voltage to power notebooks and routers. Features: 1).It supports PD3.0 and PD2.0 voltage deception output,and the mode can be switched freely. 2).It has a key lock function to prevent misoperation. 3).It has an LED output indicator to show the working status. 4).The parameters are automatically saved,and the last decoy setting is executed when the power is turned on again. 5).Ultra-low power consumption,support 100W output. Parameters: 1).Product Name:PD2.0/3.0 Decoy 2).Input Voltage:DC 5V 3).Deceive Output Voltage:5V>9V>12V>15V>20V 4).Maximum Output Voltage:20V 5).Maximum Output Current:5A 6).Work Temperature:-25℃~85℃ 7).Work Humidity:5%~95%RH 8).Size:44*20*15mm Instructions for Use (must use a power supply with PD protocol): 1). Press and hold the S- button,then insert the module into the power supply,and then reset to 5V output (">>" means power on). 2). Press and hold the S+ button,and then insert the module into the power supply.At this time,switch whether to turn on the key lock and save the state after power-on.If the key lock is unlocked,it must be unlocked to adjust the voltage after power-on to prevent misoperation. 3). After power on,press and hold S+ button without letting go,then press S- button,and unlock when there is a button lock. 4). After powering on,press and hold S- button without letting go,then press S+ button to lock the button. 5). Quick start:Plug the board into the PD power supply.At this time,the LED light indicates the current setting decoy voltage.If it is not on,it is the default 5V. Adjust the output voltage:The board is locked by default,and you need to unlock it first.The method is to press and hold S+ button and then press S- button.At this time,the unlocking is complete and you can release the button.Then click S+ button to increase the voltage or click S- button to decrease the voltage. Instructions for Use of Test Function: 1). Press S- button and S+ button at the same time and then power on,the module enters the test mode,and the output voltage will automatically cycle from 5V>9V>12V>15V>20V.The voltage change time can be adjusted by S+ button and S-button,in seconds. 2). This function is a test function,the mode is not saved,and the switching time can be saved. Interface Description: 1. Type-C Interfeace Male:Type-C male connector:Connect PD power supply as input,which can input 20V 5A voltage and current. 2. Type-C Interfeace Female:Used as an input to connect to a PD power supply,or as an output interface,which can output 20V 5A voltage and current. 3. USB-A Female Interface:As an output interface,it can output 20V 3A voltage and current. 4. Positive and negative wiring pads:as an output interface,it can output 20V 5A voltage and current.
Preview:
1.
We only accept payment via
PayPal
, other payment is not acceptable.
2.
If you don’t have PayPal account, please register through https://www.paypal.com before you bid our items.
3.
Please make sure your shipping address is the same of your eBay address before you pay. We will not be responsible for such a case if you change you shipping address as we have shipped your items out.
1.
We only ship to confirmed eBay address, your eBay address must match your Shipping address.
2.
All items are available for shipping within 1-3 business days after receiving the payment. Please be aware that weekends are not business days.
3.
Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. Shipping fee has including the local handing and packaging fee.
4.
We are unable to take any responsibility for any custom delay or tax, Reason is because transit time is highly depended and provided by postal Service( Except weekends and holidays.)
1.
If you are not satisfied with the item, please return it within 7 days for a replacement or money back. Please contact me before you return it.
We are 100% Satisfaction Guarantee to our customers.
2.
All returned items MUST BE in the original packaging with all components and accessories included, And you MUST provide us the return shipping information The shipment or the tracking number）.
3.
Returned shipping fee is to be paid by the buyers. We will not responsible for any custom duty or import tax. Thank you for your understanding.
Our working time:
Beijing time : Monday to Saturday 8:30 am to 5:30 pm.
If you send email to us,In our working hours will be resumed within 24 hours.
If you we are not satisfied with the product or service ,please contact me and don't give us negative or natural feedback,We must give you a satisfactory solution.
I
hope all of us try together to create a better environment for ebay shopping
!!