PWM↔Voltage Conversion Module 0%-100% PWM Convert to 0-10V 0-5V/0-10V to 0-100%

Description

Visit store
Items for sale
About us
Product Details
PWM to voltage module 0%-100% PWM conversion to 0-10V voltage
Features:
1: Wide range of applications
2: Easy to operate, can be fine-tuned by potentiometer
3: The module is small, easy to carry and easy to use;
4: Adopt single chip embedded technology;
5: Simple and easy to understand
Product parameters
1. Adopt single chip embedded technology;
2. The peak value is 4.5V to 10V level, and the jumper is inserted at 5V. This type of level signal is mainly aimed at the interface of the 5V CPU of the conventional industrial control card (such as MACH3 board);
3. Easy to operate, can be fine-tuned by potentiometer;
4. Select the PWM signal input level range by short-circuiting;
5. The module is small, easy to carry and easy to use;
6. Module working voltage: DC12V-30V (power requirements: greater than 100MA);
7. PWM signal receiving frequency range: 1KHZ-3KHZ;
8. PWM signal input level range:;
9. Peak 12 to 24V level, the jumper is inserted at 24V. This type of level signal is mainly aimed at the conventional PLC interface;
10. Conversion range: 0%-100% PWM conversion to 0-10V voltage;
11. Allowable error: 5%;
Packing list:
1* PWM to voltage module
Voltage
to
PWM
module
0-5V/0-10V voltage is converted to 0%-100% PWM
Features:
1: Wide range of applications
2: Easy to operate, can be fine-tuned by potentiometer
3: The module is small, easy to carry and easy to use;
4: Adopt single chip embedded technology;
5: Simple and easy to understand
Product parameters
1. Adopt single chip embedded technology;
2. Easy to operate, can be fine-tuned by potentiometer;
3. Select different input voltage ranges through the short circuit;
4. The module is small, easy to carry and use;
5. Module working voltage: DC5V-12V;
6. Conversion range: 0-5V/0-10V voltage is converted to 0%-100% PWM;
7. Allowable error: 1%-3%;
8. Output PWM amplitude: 5V
9. Output PWM frequency: about 50KHz
(1) VCC: Working power supply 5V-12V.
(2) GND: working power ground
(3) VIN: Input voltage 0-10v.
(4) GND: Input voltage ground.
(5) GND: output PWM ground.
(6) PWM: output PWM.
(7) Operation instructions. Connect the working voltage to VCC and GND, not reverse, so as not to damage the board and device
(8) Connect the controllable voltage to the VIN terminal, the voltage range is divided into 0-5V and 0-10v according to the selected mode.
(9) The output at the PWM terminal is PWM.
(10) The duty cycle can be adjusted by adjusting the voltage.
(11) The accuracy can be controlled by adjusting the potentiometer.
Packing list:
1* Voltage to PWM module
Payment Method
Shipping Policy
Feedback
Payment Method
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping Policy
1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.