Electrical Equipment Solar Controller Power Regulators Blacklight Controller

Description

Electrical Equipment Solar Controller Power Regulators Blacklight Controller
DESCRIPTION
Electrical Equipment Solar Controller Power Regulators Blacklight Controller
Feature:
*Software Update Version100% MPPT 60A solar charge controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%.Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller.
*Fit for USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery.User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer.Real-time energy recording.
*Blacklight LCD Dispaly PV voltage/output power/Battery voltage/charging current/working mode/Temperature, TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters.
*Intelligence Fan-on temperature >45 and off < 40,Porous heat dissipation.and fan use BEARING technologies increase life UP TO 5000hrs in normal use.
*Charging 3-stage: constant current(MPPT), constant voltage(Absorption Voltage), floating charge
*Selectable battery type Vented / Sealed / Gel / NiCd / Lithium battery (default is Sealed) (defined voltage for other battery by user)
*Soft start time ≤1S, Dynamic response and recovery time 100us
*Max efficiency ≥98.1%, PV utilization ≥99%
*In order to reduce the cost of electricity caused by high current, PV and battery each have two terminals
MULTIPLE ELECTRONIC PROTECTIONS
Short-circuting
Reverse-current
Overcharging
Overload
Over-discharging
Reverse polarity protection
Notes: The output terminal is for lamp only( 12V system less 60W, 24V/36V/48V system less 100W ),and it will be burnt if connecting to other loads. The output for battery is no polarity reverse protection.
Remarks:
1. The maximum PV input voltage (Voc): DC160V (The controller can not work with this long duration voltage, which will interrupt the controller. Refer to the input voltage of PV).
2. The output port is only for lamps (12V system less 60W, 24V/36V/48V system less 100W) and will be burned if connected to other loads. The battery output is not reverse polarity protection.
3. Always connect the battery first!!! Make sure the battery voltage is sufficient for the controller to recognize the correct system voltage. The order of dismantling contradicts the order of wiring.
4. Do not connect any inverter/wind/generator or charger to the controller, please connect the inverter to the battery side.
5. Ensures the solar input voltage exceeds 3V or more than the battery and the total input power exceeds the max. , the charging current is almost zero when the controller has trickle charge.
Specification
MPPT controller model: HHJ-60A
Rated current: 60A
Charging mode: MPPT automatic maximum power point tracking
Charging method: three stages: constant current (MPPT), constant voltage, floating charge
System type: DC12V/24V/36V/48V automatic identification
System identification voltage: DC9V-DC15V (12V system), DC18V-DC29V (24V system), DC30V~DC39V (36V system), DC40V-DC60V (48V system)
Soft start time: ≤1S (12V/24V/36V/48V system)
Dynamic response recovery time: 100us (12V/24V/36V/48V system)
Machine efficiency: ≥98.1% (12V/24V/36V/48V system)
Photovoltaic module utilization rate: ≥99% (12V/24V/36V/48V system)
MPPT working voltage and range: PV open-circuit voltage recommended input voltage: DC20V-DC80V (12V system), PV open-circuit voltage recommended input voltage: DC37V-DC105V (24V system), PV open-circuit voltage recommended input voltage: DC50V-DC160V ( 36V system), PV open circuit voltage input voltage recommended value: DC72V-DC160V (48V system)
Maximum limit input voltage (VOC): DC150V (12V/24V/36V/48V system)
Maximum solar panel input power: 720W (12V system), 1440W (24V system), 2100W (36V system), 2800W (48V system)
Packing list:
1*MPPT solar controller
POLICES
Shipping
Payment
WARRANTY
We only
ship to confirmed ebay Order addresses.
Please comfirm that your Order address is in line with your shipping address.
Please kindly note that
the c
ombined shipping
is not provided
because the shipping fee is calculated by weight. Also, the each additional item means
exactly
the the same color and size.
It takes about
7
-15 working days to US; about 10-30 working days to other countries.
Transit time may be a little delayed because of the
bad
weather and customs
inspection
. If you
do
not receive your
item
within 30 working days since payment finished, please contact us immediately for further assistance.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
p
lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
working hours.