5A 6A 8A 10A 15A DC-DC Boost Converter Step Up Power Adjustable portable charger

Description

5A 6A 8A 10A 15A DC-DC Boost Converter Step Up Power Adjustable portable charger
Description:
600w step up
Input voltage : 10V -60V
Input Current: Maximum input current of 15A
Output voltage : 12V -80V continuously adjustable
Output current: maximum output current of 10A ( adjustable )
Output power: the effective power P = input voltage V * 10A
Conversion efficiency: up to 95% ( input voltage, current; output voltage and current impact of conversion efficiency )
Short circuit protection : Fuse
Weight :251g
3.5-30V to 4.0-30V 5A
1.Input voltage range: 3.5V-30V (output set voltage higher than the input voltage must be guaranteed)
2.Output voltage range: 4.0V-30V
3.Input maximum current: 5A (based on power conservation under nominal conditions the output current
Uin * Iin * efficiency = Uout * Iout)
5.Continuous operating current: 3A (good ventilation conditions, the output voltage and input voltage ratio can not be greater than 3)
6.Around 90% of the full load efficiency
Application examples:
The 7.4V boost 12V applications in Aeromodelling camera.
Efficient booster circuit adjustable DC-DC boost the input voltage (4 to 30) V
adjustable output (5 to 30) the V input Maximum input current 5A efficiency up to 92%,
using the dedicated package boost chip beyond the LM2577,
not bean large boost IC performance and output drive power up to 30W.
4.5V-32V to 5-42V 6A
Module property:Non-isolated step up module(boost)
Input voltage:4.5V-32V
Input current:0A-6A
Output voltage:5V-42V
Output current:0A-6A
Working temperature:-40℃~+85℃
Working frequency:180KHz
Transfer efficiency:94%(max)
Short circuit protection:Yes
Over temperature protection:Yes
Input reverse protection:NO
PCB size:60x60x20mm
8A step up
The isolation booster module
The highest conversion efficiency：96%
Input voltage：6~32（max 35V）
Output voltage: 6~42（max 52V）
Maximum input current: 8A
maximum current output: 5A
Static working current: 15mA
Power :70W
To adapt to the environment:-40~+85℃
Working frequency: 150KHz
Characterization:
Adopt high-frequency electrolytic capacitor reduce the ripple value, more stable output voltage;
Provide reverse connect protection, avoid the equipment damage caused by incorrect operation;
Stops booster, soft short circuit protection, short circuit, automatic recovery when short circuit faults remove;
With access to electricity, the LED indicator light, easy to understand
way to install：4*M3 screw
Connection mode: welding output terminals free
Module size: 30 mm high 20 mm long 60 mm wide
8.5-48V to 10-50V 10A
Module name :250W boost constant current module
Module properties: non-isolated step-up module (BOOST)
Input voltage: DC8.5V-48V
Input current: 10A (MAX) exceeds 8A please enhance heat dissipation
Quiescent current: 10mA (12V liter 20V, the output voltage, the higher
the current will increase too quiet)
Output voltage: 10-50V continuously adjustable
Constant] range: 0.2-8A
Temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation)
Operating frequency: 150KHz
Conversion efficiency: up to 96%
Overcurrent protection: There
Input reverse polarity protection: Yes,
Installation: 4 3mm screw holes
Connection method: Connection Output
Module size: Length 70mm width 36mm height 13mm
Single module: 50 g
9-24V 8V to 20V 2A(Brand New Factory Supply Products)
- LCD screen with white characters and a blue background displays two groups of voltage and current simultaneously.
- Uses a standard DC-Socket (5.5/2.1) input
- Coarse and fine tuning  positioner for precise voltage regulation.
- Input voltage 9-24V (max. 30V), reverse polarity protection
- Two groups of current can work simultaneously without conflict.
- Adjustable voltage available on DuPont connectors and terminal blocks which can be tightened with screws.
- Output voltage adjustable from 0.8V to 20V, max. 2A load with short circuit protection.
- Fixed 5V Output available on USB- and DuPont-Connectors. Max. 2A load with short circuit protection.
- Over 90% efficiency rate (related to the input and output voltage, current and dropout)
- Size: 80mm*80mm*25mm.
-Weight: about 85 grams.
Operation: Powers on automatically when power is attached. Use the “Power”-Button to switch off and on again.
Automatic zero-calibration may be less accurate with the age of the product, due to component aging and environmental temperature changes.
Calibration Mode: Disconnect power and all loads. Press the “Power”-Button and keep it pressed while connecting Power. The automatic zero-calibration will be performed. On success, the LCD will display 0.
Package Included:
1PCS X DC Powe Supply with box
Free Alligator clip / 5.5mm
Free DC connector
Free 60cm red / black  power cables
Shipping
Feedback
Contact us
Return Policy
Shipping
Domestic
We believe you need to get your purchases as quick as possible. As a general rule your item will be shipped within 24 hours of you purchasing it. We pack and post from Tuesday to Sunday (Mondays we are closed) but definitely get all our mail off to the post office first thing Monday morning for you. Mail gets picked up at 12pm so chances are if you buy before lunchtime your item will leave the same day.
International
Same as above but understand that depending on what part of the world you are from it does take a little longer to send, delivery can be from 7-15 working days. Also other factors to take into consideration are quarantine and customs regulations in your country. It is also a consideration that customs duties and GST/VAT may be payable at the buyers expense.
Combined Postage (for items with shipping charges):
We are more than happy to combine postage, just use the Buy it Now function in eBay (but DO NOT PAY after purchasing each item) to buy all the products you need, when you have finished request a combined invoice, we will base the shipping cost on the size, weight and your location.
Feedback
* When you satisfied with our product and services please leave us positive feedback.
* If you have got the package, please confirm "
Delivery on time
" For us.
* If a problem occurs, contact us immediately with any email request.
* Just contact us using the "
Ask the seller a question
" link on eBay.
Your Satisfaction is our Priority. Our goal is to make all our customers as happy as possible while shopping with us.
Contact us
For anything problem about product, price, shipping or order status, pleasecontact us via eBay message.Just contact us using the "
Ask the seller a question
" link on eBay.
We expect positive feedback and 5 scores DSR  from you.
Return Policy
We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
Please include your eBay ID and item number with any email requests.