400000V DC 3-6V to 400kV Boost Step-up Power Module High-voltage Generator

Description

Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
400000V DC 3-6V to 400kV Boost Step-up Power Module High-voltage Generator
Popular
Popular
Product Introduction
400KV
Square
Description:
1. Model Form: MC-CBPG
2. Physical Volume: 40x36.5x8mm
3. Input voltage: 3.7V-6V
4. Current Input: 0.5A-1A
5. Input line length: about 4 cm
6. High pressure type: pulsed DC type
7. Output voltage: about 400KV (please pay attention to safety when it is used)
8. High voltage discharge poles distance: 1.5 cm-2 cm
9. About power supply: recommend 6V and above 2000mAh for best results
Feature:
1. High voltage pulse output current
2. Small size
3. high efficiency
4. Simple peripheral circuits (just need to button and battery)
Application:
1. Scientific experiments
2. Electronic Instruments
3. Ionizer
4. DIY Kit
NOTE:
1. Avoid power on in the absence of load. You must adjust the proper distance for high-voltage terminal before turning on. The more distance from the arc, the higher the input voltage and the battery capacity.
2. It is forbidden to exceed the maximum arc distance power. In the opposite case, Energy can not be released due to high pressure, easily damaged modules.
3. It can not work a long time.
4. Please connect it to the metal after the test to release surplus energy!
5. It is a high pressure arc generator and it is not high temperature arc generator so that it can not ignite paper or cigarette
Package Include:
1x DC Arc 3.7V-6V to 400KV High Voltage Pulse Generator Ignition Boost Step up Module
400KV(cylinder)
Description:
input voltage: DC 3 V to 6 V
Input current: 2 A - 5 A
High pressure type: the type of pulse current
Output voltage: 400000 v(Please pay attention to safety)
High pressure discharge distance between: 10 mm - 20 mm
The output high voltage wire length: 100 mm
Input power cord length: 100 mm (the red line is positive)
Wiring:
Red and green power connection red line:"+" green line "-"
output : the other side ,same color cable
please notice:
the high-voltage module should avoid the use of electricity in high voltage no-load . (Power must be adjusted to a suitable distance to the high-voltage output line , battery capacity is proportional to the distance and the use of the high-pressure arc ( not a voltage as high as possible , you must provide enough current ) . Experimental test of the arc distance from short to long , Do not exceed the maximum arc distance electricity, energy can not be released due to high pressure , can easily damage the module. )
Work: intermittent , continuous work does not allow more than 1 minute and the output side does not allow shorting . Improper voltage and long working hours easily damaged module
Package included:
1 x DC 3v-6v to 400kV 400000V Boost Step-up Power Module High-voltage Generator
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
400000V DC 3-6V to 400kV Boost Step-up Power Module High-voltage Generator
Product Introduction
400KV
Square
Description:
1. Model Form: MC-CBPG
2. Physical Volume: 40x36.5x8mm
3. Input voltage: 3.7V-6V
4. Current Input: 0.5A-1A
5. Input line length: about 4 cm
6. High pressure type: pulsed DC type
7. Output voltage: about 400KV (please pay attention to safety when it is used)
8. High voltage discharge poles distance: 1.5 cm-2 cm
9. About power supply: recommend 6V and above 2000mAh for best results
Feature:
1. High voltage pulse output current
2. Small size
3. high efficiency
4. Simple peripheral circuits (just need to button and battery)
Application:
1. Scientific experiments
2. Electronic Instruments
3. Ionizer
4. DIY Kit
NOTE:
1. Avoid power on in the absence of load. You must adjust the proper distance for high-voltage terminal before turning on. The more distance from the arc, the higher the input voltage and the battery capacity.
2. It is forbidden to exceed the maximum arc distance power. In the opposite case, Energy can not be released due to high pressure, easily damaged modules.
3. It can not work a long time.
4. Please connect it to the metal after the test to release surplus energy!
5. It is a high pressure arc generator and it is not high temperature arc generator so that it can not ignite paper or cigarette
Package Include:
1x DC Arc 3.7V-6V to 400KV High Voltage Pulse Generator Ignition Boost Step up Module
400KV(cylinder)
Description:
input voltage: DC 3 V to 6 V
Input current: 2 A - 5 A
High pressure type: the type of pulse current
Output voltage: 400000 v(Please pay attention to safety)
High pressure discharge distance between: 10 mm - 20 mm
The output high voltage wire length: 100 mm
Input power cord length: 100 mm (the red line is positive)
Wiring:
Red and green power connection red line:"+" green line "-"
output : the other side ,same color cable
please notice:
the high-voltage module should avoid the use of electricity in high voltage no-load . (Power must be adjusted to a suitable distance to the high-voltage output line , battery capacity is proportional to the distance and the use of the high-pressure arc ( not a voltage as high as possible , you must provide enough current ) . Experimental test of the arc distance from short to long , Do not exceed the maximum arc distance electricity, energy can not be released due to high pressure , can easily damage the module. )
Work: intermittent , continuous work does not allow more than 1 minute and the output side does not allow shorting . Improper voltage and long working hours easily damaged module
Package included:
1 x DC 3v-6v to 400kV 400000V Boost Step-up Power Module High-voltage Generator
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.