220V 10000W SCR Electronic Voltage Regulator FAN Speed Temperature Controller

Description

Specifications:
Name: SCR Voltage Regulator
Model: SNT-10000W（knob)
Input voltage: AC 220 V
Output voltage: 0-220 V（adjustable）（The voltmeter does not work when the output voltage is lower than 5V）
Max power: 5000W（long term load 3500W-4000W)
Voltage adjusting range: 0-220 V Stepless adjustable (under load conditions) step down to 0V, step up from 10V
Rated current: 18A
Max current: 25A
Product features: zero lag, zero delay, with peak voltage absorption circuit to effectively protect high-power thyristor anti-surge, dust peak, RC absorption multiple protection
Features：
High power regulator, stepless regulation, help adjust speed, temperature, voltage and light.
Using the new two-way high-power thyristor, current up to 25A, a good solution to the problem of over-current electric wire in the case of cooling the resistance is too small to cause.
Adopt iron outshell design, solid and firm, wear resistance and with fine durability.
Equipped with LCD display, with stepless rotation knob for adjust voltages range-from 10-220V.
Separate switch control, freely control the input power and cut off power.
Adopt multi functional industrial sockets, thicken copper part design, with fine contact and safety.
For electric power is less than 10000W of large electrical appliances , so the general home appliances or small factories are enough to use.
For safety reasons, it's recommended to use a Voltage Converter/Transformer that's max watts is at least 50% higher than your appliance. For example; 5,000 transformer can be only be used with an appliance that uses up to 3,300 Watts that is to prevent damage from the transformer itself and the appliance being used.
Suitable for electrical components, such as: electric stove, water heater, heat transfer lamp dimming, small motor electric soldering iron and etc.
Package list:
1*Voltage Regulator