15pcs TP4056 5V 1A DW01A 18650 Lithium Charge Protection BMS Micro USB Li-On

Description

TP4056 1A DW-01 18650 Lithium 1S 2S BMS Charge Protection Micro USB
15 PCS - TP4056 DW-01A Lithium Battery Charge/Discharge Protection Board
TP4056 DW-01 Lithium Charge Protection Features
Charging current from 130mA to 1A
Constant Current / Constant Voltage Charging
5V input, Automatic 4.2V Peak Charge Voltage Threshold with "Soft Start" inrush current limiting (slow build up to 4.2v from existing charge so the lithium cell is not blasted with a large rush of current when initially plugged in/powered on)
Over/Under Charge Protection
Can be used with a Micro USB cable or by soldering a connector of your choice directly to the PCB ( +/- on left and right of Micro USB Port)
LED Charge Indicators (Red - Charging / Green - Complete)
Output/Discharge directly from the TP4056 - Perfect for small projects and integrating directly into various devices as a temporary or permanent power solution without the need to connect or disconnect wires for charging.
Automatic recharge while connected to charge power.
Great for permanent enclosures & panel mounts.
Use with 7-segment, TFT and LED battery indicators inline with your charge/discharge leads to add a visual aid to your projects.
Works with various types of lithium battery types (Li-On, Li-Po) and can charge single (1S) and double (2S) cell configurations. (charge times will lengthen with additional cell)
Short circuit and over-current protection
Can be configured for active charge temperature monitoring
Trickle charge feature for heavily discharged batteries (2.9v)
DW-01 Charge Protection chip
Items are NEW & SEALED/SHIPPED in ANTISTATIC BAG. Free Shipping provided via USPS First Class Mail.