-40%

10x TP4056 1A Micro USB Charger Modules 5V 18650 Lithium Battery Charging Board

$ 2.25

Availability: 78 in stock
  • Brand: Unbranded
  • Color: Multicolor
  • Condition: New
  • Bundle Description: As Show
  • Type: TP4056 Lithium Battery Charger Module
  • Package Included: 10pcs

    Description

    W
    E
    L
    C
    O
    M
    E
    to
    MY ST
    O
    RE
    HOT SALE!!
    Support Wholesale
    10x TP4056 1A Micro USB Charger Modules 5V 18650 Lithium Battery Charging Board
    Specifications:
    Condition: 100% Brand New and High Quality !
    Board size: approx. 26 * 17mm
    Input voltage: 5V
    Charging cut-off voltage: 4.2V ± 1%
    Maximum charge current: 1000mA
    Battery over discharge protection voltage: 2.5V
    Battery overcurrent protection current: 3A
    Quantity: 10pcs
    Instructions:
    1. Test current ammeter can only be connected in series at the 5V input of the charging board.
    2. Charging current is best battery capacity of 0.37C, is 0.37 times the capacity, such as 1000mAH battery charge current 400 is enough. Too fast to charge the effect of fast, red finished the battery voltage out on the more.
    3. The charging connection wire can not be too long. So that the connection resistance is large. Too thin words out of the battery voltage out of the more.
    4. Good connection with the battery is good. Or rushed out of the battery voltage out of the more.
    5. If the 5V input voltage is high, such as 5.2 or even 5.5, will cause the charging current less than 1000mA, which is normal. High voltage chip heat will automatically reduce the charge current, not to burn the chip. Chip in the work of about 60 degrees heat is normal. After all, the charging current is large.
    6. Input reverse does not affect the chip, but the output (battery side) will burn back the chip.
    Input with MINI USB female base, you can directly use the phone charger to do input to the lithium battery charge, and still retains the input voltage wiring pads.
    Can be used for voltage 3.6 3.7V and so on 18650, polymer and other lithium battery charge and discharge protection, single or multiple parallel can also be used
    Module application range.
    Used for single-cell lithium or multi-section parallel lithium charging, charging port can take power from the USB.
    Fine workmanship and good performance.
    Stable and reliable.
    Easy to use.
    Long service life.
    A perfect gift for yourself or friend
    NOTE: For different monitors, the color may vary slightly. Besides, please allow some errors of manual measurement, thank you for your understanding!
    Please check the measurement chart carefully before you buy the item.
    Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
    Package Includes:
    10x Charging Board
    Note :There is 2-3% difference according to manual measurement.
    please check the measurement chart carefully before you buy the
    item. Due to the difference between different monitors, the picture may not reflect  the actual color of the item. Thank you!
    High quality in EU and US quality standard
    converse : 1 inch = 2.54cm or 1cm = 0.393 inch
    NOTE: the product in the picture maybe larger than actual one,
    Please check the size before Bidding!!
    We accept Paypal only!
    All payments should be made within 7 days of your last winning bid
    All items will be shipped to buyer's eBay address within 2 business days upon payment. Please inform us before payment if you need to change the shipping address (
    Pls send Email Message to us,  Leave Notes is Invalid
    ).
    We usually ship orders within 24 hours after payment.
    We ship to worldwide by Hong Kong air mail, it usually takes 15-25 business days, but sometimes it may need about 30 days to arrive. if you don't receive the package over 30 days, please contact us, we will help you to solve the problem (resend or full refund).
    If item is defective, you can return for refund or exchange within 7 days after receiving.
    Buyer should be responsible for shipping cost on returned items.
    We will swap for a good one upon stock availability, or make a refund.
    If you are satisfied with our products and service, please help to leave "Positive Feedback" and "5 Perfect Stars" for us when you receive your items and we will do the same for you. Thanks in advance!
    If you have any questions regarding the transaction, before leaving any feedbacks, please contact us and give us an opportunity to find a solution. Thank you!
    If yo
    u have any problems, please feel free to
    contact us
    by sending email to me, we will reply within
    24 hours.
    Specifications:
    Condition: 100% Brand New and High Quality !
    Board size: approx. 26 * 17mm
    Input voltage: 5V
    Charging cut-off voltage: 4.2V ± 1%
    Maximum charge current: 1000mA
    Battery over discharge protection voltage: 2.5V
    Battery overcurrent protection current: 3A
    Quantity: 10pcs
    Instructions:
    1. Test current ammeter can only be connected in series at the 5V input of the charging board.
    2. Charging current is best battery capacity of 0.37C, is 0.37 times the capacity, such as 1000mAH battery charge current 400 is enough. Too fast to charge the effect of fast, red finished the battery voltage out on the more.
    3. The charging connection wire can not be too long. So that the connection resistance is large. Too thin words out of the battery voltage out of the more.
    4. Good connection with the battery is good. Or rushed out of the battery voltage out of the more.
    5. If the 5V input voltage is high, such as 5.2 or even 5.5, will cause the charging current less than 1000mA, which is normal. High voltage chip heat will automatically reduce the charge current, not to burn the chip. Chip in the work of about 60 degrees heat is normal. After all, the charging current is large.
    6. Input reverse does not affect the chip, but the output (battery side) will burn back the chip.
    Input with MINI USB female base, you can directly use the phone charger to do input to the lithium battery charge, and still retains the input voltage wiring pads.
    Can be used for voltage 3.6 3.7V and so on 18650, polymer and other lithium battery charge and discharge protection, single or multiple parallel can also be used
    Module application range.
    Used for single-cell lithium or multi-section parallel lithium charging, charging port can take power from the USB.
    Fine workmanship and good performance.
    Stable and reliable.
    Easy to use.
    Long service life.
    A perfect gift for yourself or friend
    NOTE: For different monitors, the color may vary slightly. Besides, please allow some errors of manual measurement, thank you for your understanding!
    Please check the measurement chart carefully before you buy the item.
    Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
    Package Includes:
    10x Charging Board